Specifications: 6330 Premium available from Pacific Ag Rentals, CA, AZ

Engine  
 
Manufacturer John Deere 4.5L PowerTech Plus (4-valve) engine; 4.5L PowerTech E (2-valve) engine
   
Aspiration Std. Variable Geometry Turbocharger w/ air-to-air aftercooling and exhaust gas recirculation; Opt. fixed geometry turbocharger with air-to-air aftercooling
   
Cylinders/Displacement, cu. in. (liters) 4/276 (4.53)
   
Cylinder Liners Wet sleeve
   
Fuel Tank Cap., US Gal. (L) (Open; Cab) ---
   
Standard 48 (182)
   
Performance
 
Advertised PTO HP (kW) @ Rated RPM 89 (66) @ 2300 per SAE
   
Official PTO HP (kW) @ Rated RPM 87.7 (65.4) @ 2300 per SAE
   
@ Standard PTO @ Eng RPM 93.1 (69.4) @ 2208 per SAE
   
Maximum @ Eng RPM 100.8 (75.2) @ 1900 per SAE
   
Advertised Engine HP (kW) @ Rated Speed 110 (82) @ 2300 per ISO 97/68/EC
   
Max Unballast Drwbr HP (kW) @ Eng RPM 91.3 (68.1) @ 1901
   
Maximum Torque (PTO) @ RPM, lb-ft (Nm) 295 (400) @ 1500
   
Max Torque Rise (80% Rtd Spd) @ Eng RPM 43% @ 1800
   
Maximum Torque Rise % (PTO) @ Eng RPM 47.1% @ 1500
   
Fuel Use, U.S. gal./hr. & HP hr./gal. at:
 
PTO @ Rated Eng RPM 05.47 (20.69) & 16.04 (3.16) @ 2300
   
Standard PTO Speed @ Eng Speed 05.60 (21.20) & 16.61 (3.27) @ 2208
   
Maximum PTO Power @ Eng RPM 05.83 (22.07) & 17.30 (3.41) @ 1900
   
Maximum Engine Power @ Eng RPM 05.48 (20.70) & 14.57 (2.87) @ 2300
   
Max Unballasted Drawbar Power @ Eng RPM 05.89 (22.30) & 15.50 (3.05) @ 1901
   
75% Load, Full Engine RPM (Unballasted) 04.80 (18.17) & 13.05 (2.57) @ 2381
   
75% Load @ Reduced RPM (Unballasted) 04.54 (17.12) & 13.76 (2.71) @ 2091
   
Transmission
 
Std. Transmission; Forward/Reverse PowrQuad PLUS 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve);
   
Opt. Transmission; Forward/Reverse PowrQuad PLUS 16/16 (19 mph/ 30 kmh) w/ PowerTech E (2-valve); AutoQuad PLUS 24/24 (25 mph/ 40 kmh) w/ PowerTech Plus (4-valve); IVT (25 mph/ 40 kmh) w/ PowerTech Plus (4-valve)
   
Reverser Base LH
   
On-the-Go Shifting (Yes/No/Partial) Yes
   
Clutch; Wet/Dry Wet
   
Creeper Available w/ PowrQuad PLUS and AutoQuad PLUS
   
Power Take-Off (PTO)
 
Standard Independent 540/1000 w/ reversible shaft
   
Optional Rear - 540/540E/1000 rpm, reversible shaft, shiftable in cab; Front - 1000 rpm, 21 spline
   
PTO Speeds @ Engine RPM 540 @ 2143; 1000 @ 2208
   
PTO Actuation Electrohydraulic
   
Hydraulics
 
Type Closed-center, Pressure and Flow Compensated
   
Pump Rated Output, GPM (L/min.) ---
   
Standard 29 (109.8)
   
Optional ---
   
Rated Flow @ One SCV, GPM (L/min.) 29 (109.8)
   
Max Output @ SCV Couplers, GPM (L/min.) 32.3 (122.1)
   
Maximum Operating Pressure, PSI (kPa) 2900 (19,995)
   
Maximum Hydraulic Power, HP (kW) 44.0 (32.8)
   
Hitch Draft Control Load Sense Type Electrohydraulic
   
Remote Control Valves Available Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic 2-4;
   
Hitch Category (SAE Designation) Standard 2; Opt. 3N/2 w/ telescopic draft links; Opt. 3N/2 w/ walterscheid hooks
   
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. ---
   
OECD ---
   
Standard 5060 (2295)
   
Optional 7231 (3280)
   
Sensing Type Electronic Lower Link
 
Joystick SCV Control Mechanical or Electronic
   
Final Drive
 
Type Inboard Planetary
   
Differential Controls Electrohydraulic
   
Availability ---
   
Front Yes
   
Front & Rear Yes
   
Engage On-the-Go Rear Differential Lock Yes
   
Axle Type Flange
   
Brakes, Type and Control Hydraulic Wet Disk
   
Operator Station
 
Cab ComfortGard Premium Cab w/ PowrQuad PLUS, AutoQuad PLUS; ComfortGard Premium Plus Cab w/ IVT
   
Doors 2
   
Platform - Flat/Straddle Flat
   
dB(A) Rating 71.4 with PowrQuad PLUS and 67.9 with IVT
   
Seat Suspension System Mechanical Seat w/ ComfortGard Premium Cab; Air Seat w/ ComfortGard Premium Plus Cab
   
2WD Dimensions
 
Wheelbase, in. (mm) 94.5 (2400)
   
Front Tread Range, in. (mm) 58.5-96 (1485-2438)
   
Rear Tread Range, in. (mm) 63.1-90.6 (1604-2302)
   
Front Axle Clearance, in. (mm) 18.5 (469)
   
Approx. Ship Wgt, lb. (kg) Open; Cab 9491 (4305)
   
MFWD Dimensions
 
Wheelbase, in. (mm) 94.5 (2400)
   
Front Axle Clearance, in. (mm) 18.5 (469)
   
Limited Slip Differential Standard w/ MFWD and TLS II
   
Approx. Ship Wgt, lb. (kg) Open; Cab 10,009 (4540)
   
Miscellaneous
 
Country of Manufacture Mannheim, Germany