 |
| Engine |
|
|
| Manufacturer |
John Deere 6.8L PowerTech E |
|
| Aspiration |
Turbocharged |
|
| Cylinders/Displacement, cu. in. (liters) |
6/414 (6.8) |
|
| Cylinder Liners |
Wet |
|
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
|
| Standard |
66 (250) |
|
| Optional |
83 (315) |
|
| Underhood muffler |
Yes |
|
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
127 (95) @ 2100 per SAE |
|
| Official PTO HP (kW) @ Rated RPM |
NA |
|
| @ Standard PTO @ Eng RPM |
NA |
|
| Maximum @ Eng RPM |
NA |
|
| Advertised Engine HP (kW) @ Rated Speed |
155 (114) @ 2100 per ISO 97/68/EC |
|
| Max Unballast Drwbr HP (kW) @ Eng RPM |
NA |
|
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
NA |
|
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
NA |
|
| Maximum Torque Rise % (PTO) @ Eng RPM |
NA |
|
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
NA |
|
| Standard PTO Speed @ Eng Speed |
NA |
|
| Maximum PTO Power @ Eng RPM |
NA |
|
| Maximum Engine Power @ Eng RPM |
NA |
|
| Max Unballasted Drawbar Power @ Eng RPM |
NA |
|
| 75% Load, Full Engine RPM (Unballasted) |
NA |
|
| 75% Load @ Reduced RPM (Unballasted) |
NA |
|
| Transmission |
|
| Std. Transmission; Forward/Reverse |
PowrQuad 16/16 |
|
| Opt. Transmission; Forward/Reverse |
PowrQuad 20/20 |
|
| Reverser |
LH Base |
|
| On-the-Go Shifting (Yes/No/Partial) |
Yes |
|
| Clutch; Wet/Dry |
Wet |
|
| Creeper |
Opt |
|
| Power Take-Off (PTO) |
|
| Standard |
Independent 540/1000 |
|
| Optional |
N/A |
|
| PTO Speeds @ Engine RPM |
NA |
|
| PTO Actuation |
Electrohydraulic |
|
| Hydraulics |
|
| Type |
Constant Flow Load Sensing |
|
| Pump Rated Output, GPM (L/min.) |
--- |
|
| Standard |
21.1 |
|
| Optional |
N/A |
|
| Rated Flow @ One SCV, GPM (L/min.) |
NA |
|
| Max Output @ SCV Couplers, GPM (L/min.) |
NA |
|
| Maximum Operating Pressure, PSI (kPa) |
2500 (17,236) |
|
| Maximum Hydraulic Power, HP (kW) |
NA |
|
| Hitch Draft Control Load Sense Type |
Electrohydraulic |
|
| Remote Control Valves Available |
1, 2, 3, or 4 |
|
| Hitch Category (SAE Designation) |
2, 3N Optional |
|
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
|
| OECD |
--- |
|
| Standard |
8800 |
|
| Optional |
Cat 3N/2 - 8200 |
|
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
|
| Standard |
NA |
|
| Optional |
NA |
|
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
|
| Standard |
NA |
|
| Optional |
NA |
|
| Sensing Type |
Electronic Lower Link |
|
| Joystick SCV Control |
N/A |
|
| Final Drive |
|
| Type |
Inboard Planetary |
|
| Differential Controls |
Electrohydraulic |
|
| Availability |
--- |
|
| Front |
Yes |
|
| Front & Rear |
Yes |
|
| Engage On-the-Go Rear Differential Lock |
Yes |
|
| Axle Type |
Flanged |
|
| Brakes, Type and Control |
Hydraulic |
|
| Operator Station |
|
| Rollover Protective Structure, OOS |
N/A |
|
| Rigid - Foldable - Telescopic |
N/A |
|
| Platform - Flat/Straddle |
N/A |
|
| Gearshift Location - Console/Floor |
N/A |
|
| Cab |
Cab |
|
| Doors |
2 |
|
| Platform - Flat/Straddle |
Flat |
|
| dB(A) Rating |
N/A |
|
| Seat Suspension System |
Mechanical, Air Optional |
|
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
104.3 (2650) |
|
| Front Tread Range, in. (mm) |
59.5-85.5 (1515-2225) |
|
| Rear Tread Range, in. (mm) |
N/A |
|
| Minimum Rear Tread Setting, in. (mm) |
63.5 (1612) |
|
| Front Axle Clearance, in. (mm) |
N/A |
|
| Turning Radius w/Brakes, ft. (m) |
N/A |
|
| Turning Radius w/o Brakes, ft. (m) |
15.3 (4.65) |
|
| Unballasted Operating Weight, lb. (kg) |
8776 (3980) |
|
| Approx. Ship Wgt, lb. (kg) Open; Cab |
9657 (4380) |
|
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
104.3 (2650) |
|
| Front Tread Range, in. (mm) |
59.4-88 (1510-2235) |
|
| Front Axle Clearance, in. (mm) |
20.7 (52.5) |
|
| Turning Radius w/Brakes, ft. (m) |
N/A |
|
| Turning Radius w/o Brakes, ft. (m) |
16.1 (4.9) |
|
| Limited Slip Differential |
Standard |
|
| Unballasted Operating Weight, lb. (kg) |
N/A |
|
| Approx. Ship Wgt, lb. (kg) Open; Cab |
10,252 (4660) |
|
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
|
| Wheel Tread, Min. to Max. in. (mm) |
N/A |
|
| Turning Radius w/o Brakes, ft. (m) |
N/A |
|
| Nebraska Test Unballasted w/Duals, lb.(kg) |
N/A |
|
| Unballasted Weight, lb. (kg) |
N/A |
|
| Standard Tires |
|
| 2WD |
--- |
|
| Front |
10.00-16 |
|
| Rear |
18.4R38 |
|
| MFWD |
--- |
|
| Front |
14.9R28 |
|
| Rear |
18.4R38 |
|
| 4WD |
N/A |
|
| Track Widths |
N/A |
|
| Miscellaneous |
|
| Country of Manufacture |
Waterloo, Iowa |
|
| Ballasting Restrictions, lb. (kg) |
Refer to Operator's Manual |
